Dismount the back wheel

How to dismount the back wheel of your bike.

  1. Turn the bike upside down. If necessary, use a soft pad to avoid scratching/damage.
  2. Remove the rubber/plastic caps from the wheel nuts and open these nuts (open-end wrench size 18 or 19, depending on model type & year.
  3. Pull apart the motor cable at the plug by unscrewing the cable clamps if necessary.
  4. Pull/push the chain derailleur to the rear and remove the top of the wheel. Pay attention to washers, wheel nuts and brake disc.

Motor cable connector (9-pin):