Check Motor Cable

Check motor cable of rear-wheel hub motor (e.g. ER08 / 03_Info)

  • The connector is located underneath the frame, on the right side of the bike (or on some UNI MK/Swing/Bobber models also in the control unit housing on the underside of the bike).
  • Make sure that the connector is cleanly and tightly mated and that both arrowheads on each end of the connector are almost touching.
  • Unplug the connector and check the pins for damage, debris or similar.
  • Also, check the motor cable part directly after it comes out of the motor axle, where it's also covered in a metal spring sleeve. Take this part in your hands and inspect it carefully for damages, tilts, etc.

Still need help? Contact Us Contact Us